Filter
Top Products
Activating and altering the charcoal
filter operating hours counter
(with recirculation mode)
The charcoal filters must be fitted for
the cooker hood to be used in
recirculation mode.
On delivery, the operating hours counter
for the charcoal filter is deactivated.
For recirculation mode, the operating
hours counter needs to be set to suit
the type of cooking you do.
^
Switch the fan off by pressing the
On/Off button K.
^ Press the + symbol and the
operating hours button [ on the
control panel at the same time.
The Charcoal filter symbol of the
operating hours button and one of the
fan power levels will flash.
Fan power level indicator lights 1 to IS
show the time set:
1.......................120hours
2.......................180hours
3.......................240hours
IS ....................Deactivated
^
Press the – symbol to select a shorter
operating time or the + symbol to
select a longer operating time.
^
Confirm your selection by pressing
the operating hours button [.
All the indicator lights will go out.
If you do not confirm within 4 minutes,
the cooker hood will automatically
revert to the original setting.
Checking the filter operating hours
counter
To check the percentage of time set
already used:
^
Switch the fan on with the On/Off
button K.
^
Press and hold the operating hours
button [:
–
Once, to read the grease filter
operating hours. The Grease filter
symbol [ will light up.
–
Twice, to read the charcoal filter
operating hours. The Charcoal filter
symbol will light up.
One or more of the power level
indicators will flash at the same time.
The number of flashing indicator lights
shows the percentage of the operating
time which has already been used up:
1...........................25%
1 and 2 .....................50%
1 to 3 .......................75%
1 to
IS .....................100%
The number of operating hours used
remains in the memory, even when the
cooker hood is switched off or there is a
power cut.
Operation
17