Filter
Top Products
1) Air extraction and recirculation mode
with conversion kit DUU 150 if the air is
to be directed upwards out of the wall
unit.
2) Trim the wall unit carcase so that it is
38 mm shorter than the wall unit door.
3) Installation is also possible in a 600
mm wide unit.
4) The exhaust socket can also be fitted
at the back.
5) After installation the wall unit can be
fitted with an interim panel. If this is
done make sure that the slots for the
grease filters and the charcoal filters
remain easily accessible.
6) If the wall unit has a base, openings
must be provided to enable adjustment
of the retaining force of the deflector
plate. For example:
– The wall unit has side sections, as
shown.
– The cooker hood is installed in a
600 mm wide wall unit with units at
either side.
When measuring for the height of the
wall housing unit and the cut-out,
account must be taken of any
accessories fitted, e.g. silencer, XKM
module.
Safety distance between hob and
cooker hood (S)
The following distance must be
maintained between the top of the
cooker/hob and the bottom of the
cooker hood unless a greater
distance is specified by the
manufacturer of the cooker or hob:
450 mm: above electric hobs and
cookers
650 mm: above gas hobs and
cookers
650 mm: above an open grill or a
deep fat fryer
See “Warning and Safety
instructions” for further information.
Appliance dimensions
25