Filter
Top Products
Programming the oven
Certain oven functions can be modified
by accessing the programming mode
as follows:
Set the Oven Mode Selector to "0" .
Open the oven door.
While pressing the "p" button, turn
the Oven Mode Selector to "Light".
"01:0" or "01:1" will be displayed if the
programming mode was entered cor-
rectly.
Use the "– / +" button to select the
function (01: - 05:) you wish to
change.
Press the ,,l" button to turn the func-
tion on (:1) or off (:0) as desired.
Store the programming change by turn-
ing the Oven Mode Selector to "0".
Value shown in
display when
function is:
Function activated
when set to "ON"
OFF ON
01:0 01:1 The oven is "locked"
after 3 seconds, and
any
increase in the
cooking temperature
is prohibited. The
temperature can be
decreased, however.
Increases can only
be made after the
Oven Mode selector
has been turned to
"Light" or "0".
02:0 02:1 Raises all pre-set
cooking temperatures
by 10 °C or 20 °F.
03:0 03:1 The oven light will
turn on when the
Oven Mode selector
is at "0" and the door
is opened.
04:0 04:1 Temperature is
displayed in °F and a
12 hour clock is used
(Temperature is
display in °C and a
24 hour clock is used
when set to "04:0").
05:0 05:1 The oven light will
remain on during use.
(Factory setting:
The light will go out
about 20 seconds
after the last button
was pressed. It can
be turned on when
needed by pressing
any button.)
29