Filter
Top Products
@ä
Clearance above and around the appliance
KM 93-2 (shown), KM 81-2 respectively
Shown area indicates protected
surface, which may be ceramic
tiles or other approved material.
Cable for connection to electrical
supply with 3 pin plug.
If clearance between side and rear
walls and the periphery of the burner is
less than 200 mm, the walls must be
protected with a non-combustible
material. The protection must extend a
minimum distance of 150 mm above
the burner, refer - gas fitting regulations.
@ä
Clearance above and around the appliance
28