Filter
Top Products
Description of the appliance
KM 81-2
b Trivet
c Wok/pan support
d Small burner cap
eLarge burner cap
f Burner ring
g
Large burner cap base
h Ignitor
i Cable for connection
to electrical supply approx. 3.6 ft
(1.10 m) long.
j Ignition safety control
k Burner base
l Control for burner
m Control panel
Data plate
Because the data plate is no longer
visible once the appliance has been
built in, a 2nd data plate is supplied
which should be placed into the space
provided on page 16 of these instruc-
tions under After Sales Service.
Special accessories
Special accessories are available from
your Miele Dealer or from the Spare
Parts Department.
Stainless steel cover-EA 80
A stainless steel cover is available for
the KM 81-2 cooktop. Check availa-
bility in each country.
For installation of the cover, a minimum
distance of 20" (510 mm) is required be-
tween the countertop and wall cabi-
netry.
Note:
The wok/pan support should be
removed before lowering the stainless
steel cover (EA 80).
Do not install the Da 8-2 directly
next to the gas hob.
Description of the appliance
3