Filter
Top Products
Bulletin Number Chapter 7: Appendix 73 of 102
Customer Responsibilities
Any sales, use, or other tax incident to the replacement of parts under this warranty is the
responsibility of the purchaser.
7-2 Technical Specifications
Equipment Specifications
Figure 52: Equipment Specifications
150 500 900 2500 4000 6000
150 (68) 500 (227) 900 (410) 2500 (1135) 4000 (1815) 6000 (2725)
2 to 4 2 to 6
2.0 (50) 2.5 (63)
1.5 (38) 2.0 (50)
0.7 (20) 5.2 (145)
0.2 (5) 3.6 (100)
0.07 (2) 0.18 (5) 0.38 (11) 0.82 (23) 1.23 (34) 2.17 (61)
1.5 (0.7) 4 (1.8) 8 (3.6) 25 (11.3) 35 (15.8) 45 (20.4)
1 @ 5 kg 2 @ 3 kg 2 @ 5kg 2 @ 10 kg 2 @ 15 kg 2 @ 20 kg
0.18 (5) 0.25 (7) 0.56 (16) 1.1 (31)
1/8 (0.09)
42
2.5 (63)
250 (115) 375 (170) 450 (205) 650 (295)
350 (160) 475 (215) 550 (250) 800 (360)
Height (5) 34.5 (875) 51.5 (1308) 56.5 (1435) 69.5 (1765) 85.5 (2172) 89.5 (2273)
Width (5) 26.0 (650) 37.5 (952) 37.0 (940) 45.5 (1156)
Depth (5) 22.0 (560) 37.0 (940) 40.0 (1016) 46.5 (1181)
Dimensions and Specifications
Maximum Blending Rate, lbs/hr (kgs/hr) (3)
Number of Materials to be Blended 2 to 8
Slide Gate Size - Majors, in. (mm)
2.0 (50) 4.0 (102)
Slide Gate Size - Minors, in. (mm)
1.5 (38) 3.0 (76)
Supply Hopper Capacity - Majors, cu.ft. (l.) (4)
2.5 (70) 14.3 (400)
Supply Hopper Capacity - Minors, cu.ft. (l.) (4)
1.8 (50) 10.2 (285)
Weigh Hopper Capacity, cu.ft. (l.)
Typical Batch Size, lbs. (kgs)
Load Cell Capacity, kgs
Mixer Capacity, cu.ft. (l.)
2.72 (77)
Mixer Motor Size, HP (kw) 1/6 (0.124) 1/3 (0.248)
Mixer RPM 21 22
Blended Material Discharge Opening, in. (mm) 3.0 (76.2) 4.0 (102)
Weight of Machine (approx.), lbs. (kgs) 1100 (500)
Shipping Weight (approx.), lbs. (kgs) 1300 (590)
Approximate Dimensions, in. (mm)
57.5 (1461)
57.0 (1448)
(1) Blender models with 7th and 8th component metering include Allen-Bradley 10 inch color touch screen standard.
(2) Compressed air loaders cannot be used to load 150 # blenders.
(3) See page 2 for important rate information concerning each model's maximum blending rate.
(4) Hopper capacity measured as level full volume. Capacity reduced when loaded automatically.
(5) Measurements describe standard unit without feeder or R.A.M. hoppers.