ResMed 2011-09 Ventilation Hood User Manual


 
30
Symbols
Follow instructions for use; Class II equipment;
Type BF equipment;
IP31
Device is protected against solid foreign objects of 2.5 mm diameter and greater and
vertically falling water drops; Caution; Standby or preparatory state for a part of
equipment; Connection for oxygen supply;
max 30 l/min
(max 30 L/min); Data
port; CE labeling in accordance with EC directive
93/42/EEC, class II b;
Temperature limitation for storage and transport; Handle with care; Maximum
humidity; Keep dry; Manufacturer; Upside; Catalogue number;
Serial number;
Batch code;
Do not re-use; Use by date; Keep
away from sunlight; Do not use if package is damaged;
Latex-free
Environmental information This device must be disposed of in accordance with the laws
and regulations of the country in which disposal occurs.
The crossed-out wheeled bin symbol indicates that the product bearing this symbol
may not b
e disposed of together with general househo
ld waste, but instead requires
separate disposal. This requirement for separate disposal is based on the European
Directive 2002/96/EC for electrical and electronic equipment, and the European Directive
2006/66/EC for batteries. You can hand in the product at a municipal collection point, for
example. This reduces the impact on natural resources and prevents contamination of the
environment through the release of hazardous substances.
Batteries containing more than 0.0005 percent of mercury b
y
mass, more than 0.002
percent of cadmium by mass or more than 0.004 percent of lead by mass are marked
below the crossed-bin symbol with the chemical symbols (Hg, Cd, Pb) of the metals for
which the limit is exceeded.
For further information regarding product disposal, pl
ease contact your local ResMed office
or your specialist distributor, or visit our website at www.resmed.com.
Dispose of used air filters and air tubings according to the directives in
your country.
General warnings and cautions
WARNINGS
A warning alerts you to possible injury.
Read the entire manual before using the device.
This device should only be used with air t
ubing and accessories recommended by
ResMed or the prescribing clinician. Use of incorrect air tubing and accessories may
affect the functioning of this device.
The device and the accessories are to be use
d for the specified intended use only.
10 3.69 1. 11 2.21
100 11.7 0 3.50 7.0
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in
metres (m) can be determined using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
- 20 °C
+ 60 °C
- 4 °F
+ 140 °
F
LATEX