10
English
4.3 Packaging
The vending machine is protected by
polystyrene/cardboard angles and by a
transparent polypropylene film.
The automatic vending machine will be packaged
so as to ensure protection against any
mechanical and environmental agents.
Labels are applied on the packaging, indicating:
- handle with care
- do not overturn
- protect from rain
- do not stack
- protect from heat sources
- not shock resistant
- machine type and serial number
Important
Once the transport is over, the packaging should
be undamaged, which means it should not:
- show any crushed parts, sign of shocks,
buckling or breaking
- show wet parts or signs that could lead to
suppose its exposure to rain, frost or heat
- show signs of tampering
5- GENERAL
TECHNICAL
DESCRIPTION
5.1 Permitted use
The vending machine is to be used exclusively
for the dispensing of beverages, prepared by
mixing foodstuffs with water (by brewing, as to
coffee).
To this purpose, use products that the
manufacturer has declared as being suitable for
vending in open containers. Beverages are
brewed in suitable plastic cups, which the
machine dispenses automatically. The stirrer
used for mixing sugar is automatically dispensed.
Beverage should be drunk at once and under no
circumstances can they be kept for subsequent
consumption.
5.2 Versions and models
Warning:
This manual refers to the top-of-the -range
model: it is therefore possible to find descriptions
or explanations not relating to the machine you
have.
5.3 Basic operating concepts
During normal operation, the vending machine
is in standby mode. By introducing the amount
corresponding to the price displayed and by
pressing the key relevant to the desired
beverage, you will start the dispensing cycle. This
one basically consists of:
BEVERAGE SELECTION
The machine can dispense 8 beverages. A
beverage can be selected according to the
following conditions:
the vending machine has reached the set
temperature after start-up. Otherwise, once
a key is pressed, the display shows the
message PLEASE WAIT.