Filter
Top Products
34
English
8.2.2 Structure of the programming
menu
Example of parameter setting To set the PRICE
level 3 at 0.3 :
- access the programming menu as indicated
in 8.2.1, if the password is not requested, the
entry SYSTEM MANAGEMENT will appear;
- scroll the menu items with the UP key until
PRICE MANAGEMENT is displayed;
- press the ENTER key until the following
message is displayed: PRICE TABLE
- scroll the menu items with the UP key until
the following message is displayed: PRICE
03
- press the ENTER key (the cursor on the value
to be modified will flash);
- increase or reduce the value with the UP and/
or DOWN keys until reaching 0.3 and press
the ENTER key to confirm the value desired
the cursor disappears.
8.2.3 Functions of the programming
menu
SYSTEM MANAGEMENT
The entries of the SYSTEM MANAGEMENT are:
- Vending Machine Code
It allows you to assign an identification code for
the vending machine.
- Stops
It allows you to set the maximum amount of
beverage or coffee. Once reached the maximum
amount, the vending machine stops the brewing
of relevant beverages.
The first digit on the left (00000) refers to the
quantity of the product dispensed from the last
RESET (partial counters reset).
The left hand digit, preceded by LIM, shows the
maximum dispensable quantity (changeable
value).
- Stop coffee
It allows to set the maximum number of coffee
cups to be brewed before the stop.
- Stop beverage
It allows you to set the maximum number of
individual beverages to be brewed before the
stop.
- Stop grounds
It allows you to set the maximum number of
coffee cups to be brewed, corresponding to
maximum dump box capacity. Once reached the
set quantity, coffee-based beverages dispensing
is stopped. The display shows the blinking
message REMOVE DUMPS before brewing
the last ten coffees.
Important
This stop can be reset by removing the dump
box for at least 5 sec.
Recommended solutions
It is advisable to set a max. of 100 coffees when
using the dump box supplied with the machine
Important
Do not set any stop value if you are using the
machine together with the supporting cabinet,
which is equipped with its own dump box which
is not controlled electronically
- Reset
It allows you to reset partial counters of stop
functions.
- Minimum temperature
It allows you to set the temperature that the
vending machine keeps for a few minutes after
a beverage has been brewed. Set value is not
expressed in centigrade.