Sharp SJ-F320V Refrigerator User Manual


 
GB - 19 -
If your refrigerator does not operate;
• Is there a power failure?
• Is the plug connected to the socket correctly?
• Is the fuse of the socket to which the plug is connected or the main fuse blown?
• Is there any failure at the socket? To check this, plug your refrigerator to a socket this
is surely operating.
Controlwarnings;
If the temperatures of the cooling and freezer compartments are not in the suitable levels
or there is a problem in the appliance, your refrigerator will warn you. Warning codes
appear in the Freezer and Cooling Compartment Setting Displays.
BEFORE CALLING THE SERVICE
ERROR
TYPE
MEANING
REASON
REMEDY
SR
LF
LC
HC
LOPO
failure warning
Appears when one or more of
the refrigerator parts fail or
there is a problem in the
cooling system.
CallService immediately.
Freezer
compartment is
not cold enough
This warning appears if there
has been a power failure for
a long period and when the
refrigerator is operated for the
first time.
1. If your frozen food is thawed,
consume them as soon as
possible and do not freeze them
again since there is a risk of
putrefaction.
2. Temporarily increase the freezer
temperaturesettingto the desired
level or switch the appliance to
fast freezing mode.
Cooling
Compartmentis
very hot
The optimum temperature of
the cooling compartment is
+4°C. When this warning is
displayed, the food in the
cooling compartment is under
the risk of putrefaction.
Temporarily increase the cooling
temperature setting to the desired
level or switch the appliance to fast
coolingmode.
Low voltage
Refrigerator switches to the
standby mode when the
voltage supply falls below
170 Volts
Cooling
Compartmentis
very colt
It means that the cooling
compartment cools
excessively and the food in
the compartment starts
freezing.
1. Make sure that theappliance is not
in the fast cooling mode
2. Decrease the setting of the cooling
compartment
This feature prevents the
compressor from getting damaged
due to low voltage. Refrigerator will
start operating automatically when
the voltage restores to the required
level.
PART- 6.