Filter
Top Products
GB - 5 -
Installation and Operation of your Refrigerator
• The operation voltage of your refrigerator is 220-240 V and 50 Hz.
•Aspecially grounded plug has been connected to the power cable ofyour refrigerator.
This plug should be used with a specially grounded socket of 16 amperes. If there
is no such socket in your house, please have it installed by an authorized electrician.
• Our company shall not be held responsible for damages that
may arise due to utilization with no grounding installation.
• Place your refrigerator in asuitable spot that it will not be exposed
to direct sunlight.
• It should be at least 50 cm away from heat sources such as
cookers, ovens, wing radiators and stoves and at least 5 cm
away from electrical ovens.
• Your refrigerator should not be used in the open air and should
not remain under the rain.
• If your refrigerator is juxtaposed with a deep freeze, it is
necessary to leave a space of at least 2 cm between them in
order to prevent condensation on the outer surfaces.
• Please do not place any heavy objects on your refrigerator and
place your refrigerator in a suitable spot in such a way that there
will be a free space of minimum 15 cm on the top.
• If your are going to place the refrigerator beside your kitchen
cabinets then you should keep a clearance of at least 2 cm’s
between them.
• To prevent the condenser (the black backside component with
fins) from touching the wall, put on the plastic distance guide in
its place rotating 90°.
• To ensure smooth and vibration-free operation of your refrigerator, the adjustable
front feet must be set at the suitable height and mutually balanced. You can ensure
this by turning the adjustable feet clockwise (or counter-clockwise). This process
should be performed before the food is placed in the refrigerator.
• Before using your refrigerator, wipe all its parts with warm water in which you shall
add one teaspoon of food soda, then rinse it with clean water and dry it. After the
cleaning process is completed, place all the parts back.
Before Starting to Operate Your Refrigerator
• During the first operation or to ensure the efficient operation of
the device following the relocation processes, allow your
refrigerator to remain idle for 3 hours (in a vertical position),
then insert the plug to the socket. Otherwise, you may damage
the compressor.
• The first time you operate your refrigerator, an odor might be smelt. This odor shall
disappear once your refrigerator starts cooling.
• If the supply cord is damaged it must be replaced by the manufacturer or service
agent or similary qualified people in order to avoid a hazard.