Filter
Top Products
-12-
VII. MICROPROCESSOR CONTROL (continued)
VII. k - SETTING THE DATE:
The date must be set in order for the data storage memory to correctly log events. Follow the instruc-
tions to enter the customer access code on page 8. When the control displays Thermostat
Set Point High, press the down arrow key until the control display reads Date. Press
the set button . The display will show (year). The right two numbers will be flashing.
Press the arrow keys to set the year. When the correct year is displayed, press the set
button . The display will show (month). The right two numbers will be flashing. Use
the arrow keys to set the month. When the correct month is displayed, press the set
button . The display will show (day). The right two numbers will be flashing. Press
the arrow keys to set the day. When the correct day is displayed, press the set button
. The display will then read Date. You can use the up or down arrow keys
to scroll to the next parameter, or wait 30 seconds for the control to return to normal operation.
VIII. l - SETTING DAYLIGHT SAVINGS TIME:
This parameter is preset at the factory to automatically adjust the 24-hour clock for Daylight Savings
Time. Follow the instructions to enter the customer access code on page 8. When the control dis-
plays Thermostat Set Point High, press the down arrow key until the display reads
Daylight Savings Time. Press the set button . The display will show Day-
light Savings Time (Yes, automatically adjust for Daylight Savings Time). For “YES,” press the set
button , for “NO” press the up or down arrow key . The display will read
Daylight Savings Time (no). Press the set button . The display will read Daylight
Savings Time. You can press the the up or down arrow keys to scroll to the next para-
meter or wait 30 seconds for the control to return to normal operation.
SET
SET
SET
SET
SET
SET
SET