Filter
Top Products
14
E
BEFORE OPERATING
Before operating your new DrawerMicro
Oven make sure you read and un-
derstand this Use and Care Guide completely.
• Before the DrawerMicro
Oven can be used, follow these steps:
1. Plug in the DrawerMicro
Oven.
ENJOY
YOUR
MICRO-
WAVE
TOUCH
CLEAR
AND
TOUCH
CLOCK
will appear.
2. Touch the Stop/Clear pad.
:
will appear.
3. Set clock.
TO SET THE CLOCK
1. Touch Timer/Clock pad and number 2.
2. Touch number pads for correct time of day and touch Timer/Clock pad
again.
This is a 12 hour clock. If you attempt to enter an incorrect clock time,
ERROR
will appear in the display. Touch the Stop/Clear pad and re-enter the time.
• If the electrical power supply to your DrawerMicro
Oven should be inter-
rupted, the display will intermittently show
ENJOY
YOUR
MICRO-
WAVE
TOUCH
CLEAR
AND
TOUCH
CLOCK
after the power is reinstated. If
this occurs during cooking, the program will be erased. The time of day
will also be erased. Simply touch Stop/Clear pad and reset the clock for
the correct time of day.
Note:
• The DrawerMicro
Oven can be programmed with the drawer open except
for Start/Add-A-Minute .
TIMER
1. Touch Timer/Clock pad and number 1.
2. Enter time.
3. Touch Timer/Clock pad again.
To cancel timer, touch Stop/Clear.
STOP/CLEAR
Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the DrawerMicro
Oven temporarily during timed cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice for timed cooking.