Whirlpool FES364B Range User Manual


 
3.
4.
5.
6.
Make sure
the clock and Start and Stop
Times all have the correct time of day.
Push In and turn
the Stop Time Knob
clockwise
two or three hours. The OVEN
HEATING Indicator Light will come on.
l
Use
two hours for light soil.
l
Use
three hours or more for moderate
to heavy soil.
NOTE:
Make sure the Start Time Knob is
not pushed in.
After the Self-Cleaning cycle is
completed and the oven has cooled
sufficiently,
the Lock Lever can be
moved back to the left.
DO NOT FORCE
IT. Wait
until it moves easily.
Turn
the
Oven Selector and Oven Temperature
Control Knob to OFF.
After the oven is cool, wipe off
any
residue or ash with a damp cloth.
If
needed, touch up
spots with a soapy
steel-wool pad.
To stop the Self-Cleaning
cycle at any time:
1. Push in and turn
the Stop Time Knob
clockwise
until it points to the correct
time of day.
2. Turn
the Oven Selector and Oven Tem-
perature Control Knob to OFF. When the
oven has cooled sufficiently,
move
the
Lock Lever back to the left.
DO NOT
FORCE IT. Wait
until it moves easily.
Special tips
l
Keep
the kitchen well ventilated during the
l
If the Self-Cleanlng cycle
does not get
Self-Cleaning cycle to help get rid of heat,
the oven as clean as you expected, the
odors, and smoke.
cycle may not have been set long enough
l
After the oven Is cool,
wipe up any resi-
or you may not have prepared the oven
due or ash with a damp cloth or sponge.
properly. Set the Self-Cleaning cycle
If any spots remain, clean with a mild
longer the next time and hand-clean
abrasive cleanser or cleaning sponge.
areas noted on page 21.
l
Clean
the oven before it gets heavily soiled.
Cleaning a very soiled oven takes longer
and results in more smoke than usual.
23