Filter
Top Products
PROBLEM POSSIBLE CAUSE
SOLUTION
2ontrol knob(s) You
are not pushing in
Push control knob(s) in before turning to
Mill not turn
before trying to turn.
a setting.
self-Cleaning
The Oven Selector and
Set both the Oven Selector and Oven
:ycle will not
Oven Temperature Control
Temperature Control Knob to CLEAN.
aperate
Knob are not set to CLEAN.
The range clock does not
Reset clock to show the correct time of
show the correct time
day. (See page 11.)
of day.
The Lock Lever is not in the Move the Lock Lever all the way to
CLEAN position - all the the right.
way to the right.
The Start Time Knob does
Reset the Start Time Knob to show the
not show the correct time of correct time of day. Pull knob out all
day or the knob is not all
the way.
the way out.
The Stop Time Knob is not See Step 3 in “Setting the controls” on
set ahead to the time you
page 23 for proper setting instructions.
want the Self-Cleaning
cycle to stop.
Cooking
The range is not level.
Level range. (See Installation Instruc-
results are
tions.)
not
what
you expected
The oven temperature Adjust the oven temperature control.
seems too low or too high. (See “Adjusting the oven temperature
control” on page 13.)
The oven was not pre-
heated as the recipe
calls for.
Preheat oven if called for in recipe.
The recipe you are using
may need to be altered to
improve the taste or ap-
pearance of the food.
Alter recipe as needed.
The pan used is not the
type or size recommended
in the recipe.
Refer to a reliable cookbook for recom-
mended pan type and size.
There is not proper air
circulation around pan
when baking.
Allow 1% to 2 inches (4-5 cm) on all
sides of the pans for air circulation.
There must be a minimum space of
1 inch (3 cm).
The cooking utensils are
Use cooking utensils with smooth, flat
not the proper shape or do
bottoms that fit the surface units
not fit the surface units
being used.
being used.
30