Filter
Top Products
- 6 -
6. To convert the broil burner:
a)Open the oven door and remove the
oven racks.
b)Use a 1/2" open-end wrench and turn
the orifice hood down snug onto the pin
(approximately 2-1/2 turns). DO NOT
OVERTIGHTEN THE ORIFICE. The
burner flame cannot be properly ad-
justed if this conversion is not made.
Broil Burner
Orifice
a)Use an 8 mm socket and carefully re-
move the orifice spud from each of the
four burners.
b)Install the four L.P. gas orifices in the
burners.
5. To convert the cooktop burners:
NOTE: The L.P. orifices for the cooktop burn-
ers are supplied in the literature pack inside
the oven.
Surface
Burner
Orifice
8mm
Socket
7. Reinstall the storage drawer and oven
racks.
Pin
Natural Gas:
Unit is manufactured
for natural gas
L.P. Gas:
Turn down 2-1/2 turns in
this direction
Orifice Hood