Filter
Top Products
- 16 -
2. Turn one of the cooktop burner valves to
the LITE position.
4. Touch the test leads to the J1 connector at
terminals 4 (white) and 9 (red). The AC
voltmeter should indicate 120 VAC. If not,
check the ignition switch and the main
wiring harness.
3. Touch the test leads to the J1 connector at
terminals 4 (white) and 10 (black). The AC
voltmeter should indicate 120 VAC. If not,
check for the proper voltage at the power
supply outlet, and check the main wiring
harness.
J1 Connector
Cooktop Function
1. Set the voltmeter to read 120 VAC.
4 (white)
10 (black)
J1 Connector
4 (white)
9 (red)
J1 Connector
L1
N
BK
BK
R
W
IGNITION
SWITCH
643217910
TOP BURNERS GND
10-PIN CONNECTOR
J1
DIRECT SPARK
IGNITION CONTROL
Cooktop Strip Circuit