Filter
Top Products
- 17 -
GAS DISTRIBUTION VALVE
TEST PROCEDURE
Solenoid Resistance Tests
1. Disconnect power from the range.
2. Set the ohmmeter to the R x 100 scale.
3. Touch the ohmmeter terminals to termi-
nals 1 and 2 (Broil). The ohmmeter should
read 216 Ω ±30.
4. Touch the ohmmeter terminals to termi-
nals 3 and 2 (Bake). The ohmmeter should
read 216 Ω ±30.
NOTE: Always check both solenoids. If one of
the solenoids is defective, neither one will
operate.
1
2
3