Filter
Top Products
Display messages
Messages will appear on the display to guide
you with your cooking. If you attempt to enter
unacceptable instructions, “Err” will appear in
the Display. Touch CANCEL and re-enter the
instructions.
Audible signals
Audible signals are available to guide you when
setting and using your oven. A programming tone
will sound each time you touch a pad. Two tones
will sound between cycles. A reminder tone will
sound every 30 seconds after cooking is done to
remind you that something has been left in the
oven. Four tones signal the end of the Minute
Timer function and a Cook or Defrost cycle. If you
don’t hear a tone, it is because of incorrectly
entered instructions or because the tones have
been removed. For example, a tone will not
sound If you touch a Number Pad before you
touch a Command Pad.
To remove the programming tone:
1. Open the door.
2. Touch CANCEL twice.
3. Touch START.
To remove all tones:
1. Open the door.
2. Touch CANCEL twice.
3. Touch “0”.
4. Touch START.
NOTE: Do not remove all tones if you use the
Minute Timer.
To replace the tones:
Repeat the steps above.
NOTE: If your electricity goes off, the audible
signals will come back on. Repeat steps above if
you want to remove tones again.
11