Filter
Top Products
The COOK 2 Indicator will be on during the
second cycle. The COOK POWER Indicator
will also be on if you are using a Cook Power
other than HIGH. The Display counts down the
time to show how much time is left in the
second cycle.
For 2 of every 10 seconds, the Display will
show the Cook Power you selected, if you are
using a Cook Power other than HIGH.
When the Cook 2 cycle ends, “End” will show
on the Display and 4 tones will sound. (You
can stop the tones by opening the door or by
touching CANCEL.) “End” will remain on the
Display and a reminder tone will sound every
30 seconds (to remind you that food is left in
the oven) until the door is opened or CANCEL
is touched. The Display will then show the
time of day.
Hints for cooking with more than one cycle
You can program the cooking cycles in any order.
However, when the microwave oven is started, it
will automatically go through the cycles in the
order of the examples described in this book. For
example, if you program COOK 1, KEEP WARM
and QUICK DEFROST, the microwave oven will
automatically follow this sequence: QUICK
DEFROST + (STANDING TIME) + COOK 1 +
KEEP WARM.
Changing or adding instructions
You can change times, Cook Powers, or add
cycles any time before or after touching START.
1.
2.
3.
4.
Touch the Cook cycle you wish to change or
add (COOK 1 or 2).
Touch Number Pads for the new time, if
desired.
Touch COOK POWER, if change is desired.
Touch Number Pads for the new Cook Power,
or touch COOK POWER again if HIGH is
desired.
5. Touch in new cycle and time, if desired.
6. Touch START.
23