Whirlpool MW8600XS Microwave Oven User Manual


 
Hi!
. .
‘1
6. Touch COOK POWER.
(Options: Skip to 8 if you
wont to cook at high power.)
m
.
7. Touch a Number Pod for the
Cook Power you wont.
d
Count
QWl-l
BEEPBEEP
d
CClUfk
0Wl-l
BEEP @BEEP BEEP
The COOK POWER Indicator Light will
come on and the Display will show
“P-HI:’ This shows the oven is prepro-
grammed to cook at full (HIGH) power.
The Display will show what you
touched. This example shows you
touched Number Pad 6 for 60%
of full power,
When you touch START, the QUICK
DEFROST Indicator Light will stay on. All
other Indicator Lights will go off. The
Display counts down the time to show
how much time is left in the defrost
cycle.
When the defrost time ends, the micro-
wave oven automatically lets the food
stand for the some amount of time
used for defrosting. The QUICK
DEFROST Indicator Light stays on and
the Display counts down the standing
time. During the countdown the oven
will be dark, and the fan will be off.
When the standing time is over, you will
hear 2 beeps and the cooking cycle
will start.
The COOK Indicator Light will be on
during the cooking cycle. The COCK
POWER Indicator Light will also be on
if you ore using a Cook Power other
than high.
The Display counts down the time
to show how much time is left in the
second cycle.
For 2 of every 10 seconds, the
Display will show the Cook Power
you selected, if you are using a
Cook Power other than high.
When the Cook cycle ends,“End” will
show on the Display and 4 beeps will
sound. [You can stop the beeping by
opening the door or by touching CAN-
CEL.) “End” will remain on the Display
and a beep will sound every 30 seconds
[to remind you that food is left in the
oven] until door is opened or CANCEL is
touched. The Display will then show
the time of day.