Filter
Top Products
d
COUdI
0Wf-l
The display counts down the time to
show how much time is left in the first
cycle.
When the cooking time ends, “End”
will show on the Display and 4 beeps
will sound. (Vou can stop the beeping
by opening the door or by touching
CANCEL.) “End” will remain on the
Display and a beep will sound every
30 seconds [to remind you that food
is left in the oven) until door is opened
or CANCEL is touched. The Display
will then show the time of day.
Changing the cooking time
Cooking time can be changed any time before touching START or during the cycle:
I. Touch COOK.
2. Touch numbers for the new time.
3. Touch START.
Cooking at lower cook powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the slower the
cooking. Each Number Pad also stands for a different percentage of Cook Power. Many recipes in your
MICRO MENUS<& Cookbook tell you, by number, which Cook Powerto use. Recipes in other books and
magazines may tell you by name (HI, MED, LO, etc.) or percentage (IO%, 50%, 80%, etc.).
The following chart gives the percentage of Cook Power each Number Pad stands for, and Cook
Power name usually used.
automatic 100% of full power HIGH
4 = 40% of full power
9 = 90% of full power
3 = 30% of full power MED-LOW
8 = 80% of full power
2 = 20% of full power
7 = 70% of full power MED-HIGH
1 = 10% of full power LOW
6 = 60% of full power
0 = timer [fan and light will be off]
5 = 50% of full power MED
DO THIS...
THIS HAPPENS...
1.
Put food in the oven and
close the door.
2.
Touch COOK
The COOK Indicator Light will
come on and the Display will show
four 0’s.
3. Touch Number Pads for the
cooking time you want.
The Display will show the numbers
you touched in the order you
touched them. This example shows
7 minutes, 30 seconds.
8