8. Touch START.
The PROBE TEMP and COOK POWER
Indicator Lights will stay on.
The Display will show “COOL” to
show the food is less than 9O’F.
As the food cooks, the Display will
show the internal temperature of
the food for every 5’F increase.
For 2 of every 10 seconds, the Dis-
play will show the Cook Power you
selected, if you are using a Cook
Power other than high.
When the probe senses the tem-
perature you selected, the oven shuts
off. “End” will show on the Display and
4 beeps will sound. [You can stop the
beeping by opening the door or by
touching CANCEL.) “End” will remain on
the Display and a beep will sound every
30 seconds (to remind you that food is
left in the oven) until door is opened or
CANCEL is touched. The Displby will
then show the time of day.
NOTE: “Err” will be displayed after START is touched, if an incorrect temperature has been
selected (under 90°F or over 200°F).
Hints for using the temperature probe
DO...
DON’T...
l use hot pads when removing probe from l let probe or probe cable touch any part of
food or food from oven.
the oven interior.
l stir foods during cooking when l let probe touch foil (if used). Foil can be
recommended. kept away from probe with wooden tooth-
. stir soups, casseroles and drinks before picks. Remove foil if arcing occurs.
serving.
l use paper, plastic wrap or plastic con-
l cover roasts with foil and let stand a few
tainers. They will be in the oven too long.
minutes after cooking. Remove foil if you de-
. use probe in regular oven.
tide to cook it longer. l force probe into frozen food.
l remove the probe from the oven when not
l use probe for foods that need to simmer.
cooklng by temperature.
NOTE: Some foods are started using a timed (COOK) cycle and finished by using a temperature
(PROBE TEMP) cycle. You can set PROBE TEMP to follow COOK, to avoid the need to reset the oven
halfway through cooking. PROBE TEMP can be programmed with the temperature probe out.
The oven will then pause between COOK and PROBE TEMP. “PROB” will show on the Display to
remind you to plug in the probe. Touch START to continue cooking.