Filter
Top Products
4.
Touch COOK POWER.
5. Touch a Number Pad for the
Cook Power you want.
6. Touch START.
The COOK POWER Indicator Light will
come on and the Display will show
“P-HII’ This shows the oven is pre-
programmed to cook at full (HIGH)
power.
The Display will show what you
touched. This example shows you
touched Number Pad 5 for 50% of
full power.
The COOK and COOK POWER
Indicator Lights will stay on to show
that the oven is cooking in the first
cycle at a Cook Power other than
high.
The Display counts down the time to
show how much cooking time is left
in the first cycle.
For 2 of every 10 seconds, the Display
will show the Cook Power you
selected.
When the cooking time ends, “End”
will show on the Display and 4 beeps
will sound. [You can stop the beeping
by opening the door or by touching
CANCEL.) “End” will remain on the
Display and a beep will sound every
30 seconds (to remind you that food
is left in the oven) until door is opened
or CANCEL is touched. The Display
will then show the time of day.
Changing cook power
The Cook Power can be changed any time before touching START or during the cycle.
l
Touch COOK POWER.
l
Touch a number for the new Cook Power.
l
Touch START. The cycle will cook at the new Cook Power for the original time.
OR...
l
Touch COOK POWER twice if you want to change a lower Cook Powerto HIGH.
l
Touch START.