Filter
Top Products
8.
Touch COOK POWER. (If you
want the high Cook Power,
skip to step 10).
9. Touch a Number Pad for
lhe Cook Power you want
In the second cycle.
10. Touch START.
BEEPBEEP
d
Count
QWll
The COCK POWER Indicator Light
will come on and the Display
will show “P-HI:’ This shows
the oven is preprogrammed to
cook at full (HIGH) power.
The Display will show what you
touched. This example shows you
touched Number Pad 4 for 40% of
full power.
When you touch START, the COOK 1
Indicator Light will stay on while
the oven is cooking in the first
cycle. The COOK POWER Indicator
Light will be on if you are using
a Cook Power other than high. All
other Indicator Lights will go off.
The Display counts down the
cooking time to show how much
time is left in the first cycle.
For 2 of every 10 seconds, the
Display will show the Cook Power
you selected, if you are using a
Cook Power other than high.
You will hear 2 beeps at the end of
COOK 1. You can either open the
door to check, stir or turn the food,
etc., or you can let the oven start the
next cycle. If you do open the door,
touch START after closing the door to
restart the oven.
The COOK 2 Indicator Light will be
on during the second cycle. The
COCK POWER Indicator Light will
also be on if you are using a Cook
Power other than high.
The Display counts down the time
to show how much time is left in the
second cycle.
For 2 of every10 seconds, the
Display will show the Cook Power
you selected, if you are using a
Cook Power other than high.