Filter
Top Products
Additional information:
l
Temperature may be changed after START is touched by touching TEMP the new
number and START.
l
Auto Set TEMP will follow the last COOK cycle if programmed.
l
“PROB” will show on the Display after START is touched if the probe is not plugged
into the oven. This will
only
appear when Auto Set TEMP has been selected alone, or
between the last COOK cycle and Auto Set TEMP selection.
l
“ERR” will show on the Display after START is touched, if an incorrect temperature has
been selected (under 90°F or over 200°F).
l
See “Hints for using the temperature probe” on pages 21 and 20.
Defrosting
Use QUICK DEFROST to thaw frozen food before cooking. For suggested defrost times, see
the guide behind the oven door or in your MICRO MENUS” cookbook.
DO THIS...
1.
Put frozen food in the oven
and close the door.
2.
Touch QUICK DEFROST.
3. Touch Number Pads for the
defrosting time you want.
4.
Touch START.
THIS HAPPENS...
The QUICK DEFROST Indicator Light
will come on and the Display will
show four 0’s.
The Display will show the number
you touched
in the order you
touched them.
This example
shows 2 minutes, 45 seconds.
The QUICK DEFROST Indicator Light
will stay on to show that the oven is in
the Quick Defrost Cycle.
The Display counts down the time to
show how much defrosting time is left
When the defrost time ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeping by
opening the door or by touching
CANCEL.) “End” will remain on the
Display and a beep will sound every 30
seconds [to remind you that food is
in the oven] until door is opened or
CANCEL is touched. The Display will
then show the time of day.