Filter
Top Products
5. Touch a Number Pad for
the Cook Power you want.
The Display will show what you
touched. This example shows you
touched Number Pad 5 for 50% of
full power.
6.
Touch START.
The AUTO SET and PROBE TEMP
Indicator Lights will stay on.
The Display will show “CCCL” to
show the food is less than 90°F
As the food cooks the Display will
show the internal temperature of
the food for every 5°F increase.
For 2 of every 10 seconds, the
Display will show the Cook Power
you selected, if you are using a
Cook Power other than high.
When the probe senses the tem-
perature you selected, the oven
shuts off. “End” will show on the
Display and 4 beeps will sound.
(You can stop the beeping by
BEEP BEEP BEEP BEE
p opening the door or by touching
CANCEL.] “End” will remain on the
Display and a beep will sound
every 30 seconds (to remind you
that food is left in the oven)
until door is opened or CANCEL is
touched. The Display will then
show the time of day.
NOTE: You can set Auto Set TEMP to follow COOK 1 or COOK 1 and
2. See pages 11 and
12 for instructions. Auto Set TEMP can be programmed with the temperature probe out, but
the oven will pause between the last Cook cycle and TEMP”PROB” will show on the
Display to remind you to plug in the probe.
Changing the pre-programmed selling
You can change the pre-programmed temperature and Cook Power in Auto Set TEMP
to the temperature and power you most often use. To change the Auto Set TEMP setting,
follow these steps:
1.
Insert at least Y3 of the temperature probe into the food.
2. Place food in the oven and close the door.
3. Touch TEMP twice.
4. Touch the Number Pads for the new desired temperature between 90°F and 200°F
If high Cook Power is desired, skip to Step 6.
5. Touch COOK POWER.
6. Touch the Number Pad for the desired Cook Power.
7. Touch START. The oven will cook to the new temperature at the Cook Power you
selected. After the cooking is complete, the oven will remember that temperature and
Cook Power Tor future use.
NOTE: If the electric power goes off, the oven will go
back to the pre-programmed 165°F at hlgh Cook Power setting.
16