Filter
Top Products
d
count
OWll
Changing the cooking time
The display counts down the time
to show how much time is left In the
first cycle.
When the cooking time ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeping by
opening the door or by touching CAN-
CEL.) “End” will remain on the Display
and a beep will sound every 30 second
[to remind you that food is left in the
oven] until door is opened or CANCEL is
touched. The Display will then show the
time of day.
Cooking time can be changed any time before touching START or during the cycle:
1. Touch COOK 1.
2. Touch numbers for the new time.
3. Touch START.
Cook 1 will continue cooking for the new time.
Cooking at lower cook powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the
slower the cooking. Each Number Pad also stands for a different percentage of Cook Power,
Many recipes in your MICRO MENUS” Cookbook tell you, by number, which Cook Power to use.
Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.) or
percentage (IO%, 50%, BO%, etc.).
The following chart gives the percentage of Cook Power each Number Pad stands for, and
Cook Power name usually used.
automatic 100% of full power HIGH
9 = 90% of full power
B = 80% of full power
7 = 70% of full power MED-HIGH
6 = 60% of full power
5 = 50% of full power MED
4 = 40% of full power
3 = 30% of full power MED-LOW
2 = 20% of full power
1 7 10% of full power LOW
0 7 no power [fan and light will be off)
DO THIS...
THIS HAPPENS...
1.
Put food in me oven and
close the door.
2.
Touch COOK 1.
3. Touch Number Pads for the
cooking time you want.
The COOK 1 Indicator Light will
come on and the Display will show
four O’s
The Display will show the numbers
you touched
in the order you
touched them.
This example shows
7 minutes, 30 seconds.
continued on next page
9