Filter
Top Products
Using your microwave
oven
Microwave oven controls
There are three parts in the control section:
When you first plug in the oven, a tone sounds and
-The Digital Display/Clock, and Indicator Lights
the Display will show 88:88. If after you set the
- Command Pads
Clock (page 6), the Display again shows all B’s,
- Number Pads
your electricity was off for a while. Reset the Clock.
Instructions for each control are covered on the
following
pages. Read them carefully.
Digital display/clock and
indicator iighk
When you are not
using the microwave
oven, this is an accu-
rate digital clock.
When you are using the
microwave oven, it
displays time settings,
indicator lights and
shows what number
pads you touched.
Command pads
Touch Command Pads
to tell the microwave
oven what to do and in
what order. A few
examples:
-CLOCK SET tells the
oven you are going
to set the clock.
- START tells the oven
to start.
See page 6 for informa-
tion on the tone you
hear when touching any
pad.
Each Command Pad, (except START, CANCEL
and CLOCK SET] lights an Indicator Light on
the digital display.The Indicator Light comes
on when you touch the Command Pad.
While the oven is running, an Indicator
Light (or lights] will be on to show what
the oven is doing.
Number pads
Once you’ve
touched a Com-
mand Pad to tell
the oven what you
want it to do, you’ll
touch Number
Pads to tell it...
- a time,
- a Cook Power,
- a food
temperature.
5