Filter
Top Products
Changing the pre-programmed setting
You can change the pre-programmed cooking time and Cook Power in AUTO SET
TIME to the time and power you most often use. To change the AUTO SET TIME setting,
follow these steps.
1.
Place food in the oven and close the door.
2. Touch TIME twice.
3. Touch the Number Pads for the new desired cooking time. If high Cook Power is
desired, skip to Step 6.
4. Touch COOK POWER.
5. Touch the Number Pad for the desired Cook Power.
6. Touch START, The oven will cook to the new cooking time at the Cook Power you
selected. After the cooking is complete, the oven will remember that cooking
time and Cook Power for future use.
NOTE: If the elecfrlc power ever goes
off, the oven will go back to the pre-programmed 2 minutes, 30 seconds at
hlgh Cook Power.
Auto Set TEMP
Auto Set TEMP provides ten preset probe temperature settings. One hundred ten (110) to
one hundred ninety (190) degrees at 70% cook power can be set by touching TEMP and
the corresponding number pad l-9. This provides a short-cut method for setting com-
monly used probe temperatures, The AUTO SET chart included with your microwave oven
and the AUTO SET guide on the inner door panel help you use TEMP to cook various food
items without having to look up the temperature.
A preset temperature of 165°F at HIGH cook power is available after inserting the probe,
by touching just the TEMP pad. This temperature may be changed to any temperature
from 90°F to 200°F allowing you to store your favorite cooking temperature and cook
power. See page t6 for instructions.
DO THIS...
1.
Put food in the oven and
close the door.
2.
Touch TEMP.
(Option: Skip to step 6 if
you want to use the pre-
set temperature and
Cook Power.)
3. Touch a Number Pad for
the new temperature you
want from 110°F to 190°F.
4.
Touch COOK POWER.
(Option: Skip to Step 6 if
you want to cook at 70%
power.)
THIS HAPPENS...
The AUTO SET Indicator Lights
will come on and the Display
will show 165°F (or the tem-
perature you have programmed
as your favorite cycle).
NOTE:
HIGH Cook Power Is preset
on fhls seftfng only.
The Display will show what you
touched in degrees Fahrenheit.
This example shows140”F NOTE:
Cook Power of 70% is preset
on TEMP sefflngs 1-9.
The COOK POWER Indicator Light
will come on and the Display
will show “P-70:’
continued on next page