Filter
Top Products
When Cook 2 ends, “End” w-ill show
on the Display and 4 beeps will
sound. (You can stop the beeping
by opening the door or by touching
CANCEL.) “End” will remain on the
Display and
a beep
will sound
every 30 seconds (to remind you
that food is left in the oven) until
door is opened or CANCEL is
touched. The Display will then
show the time of day.
I
1
Hlnfs for cooklng wlfh mote than one cycle.
You can program the cooklng cycles in any order. However, when the microwave oven
is started, it will automatically go through the cycles in order-AUTO SET TIME-COOK 1
- COOK 2 (or QUICK DEFROST-STANDING TIME -COOK 1 -COOK 2, COOK 1 -COOK 2 -
AUTO SET TEMP or PROBE TEMF?)
Changing or addlng instructions
You can change times, Cook Powers, or add cycles any time before touching START or during
oven operation.
l
Touch the Cook cycle you wish to change or add (COOK 1 or 2).
l
Touch numbers for new time, if desired.
l
Touch COOK POWER, if change is desired.
l
Touch number for new Cook Power, or touch COOK POWER again if high is desired,
l
Touch in new cycle and time, if desired.
l
Touch START.
Using AUTO SET
Auto Set TIME and TEMP are preset cooking cycles which store commonly used cooking
times and probe temperature settings.
Auto Set TIME
Auto Set TIME is a provides ten preset times. One to nine minutes at HIGH cook power can
be set by touching TIME and the corresponding number pad l-9. This provides a short-cut
method for setting commonly used cooking times.
The AUTO SET chart included with your microwave oven and the AUTO SET guide on the
inner door panel help you use TIME to cook various food items without having to look up
the cooking times.
A preset time of 2 minutes, 30 seconds at HIGH cook power is available by touching just
the TIME pad. The time may be changed to any time from O-99 minutes, O-99 seconds
allowing you to store your favorite cooking time and Cook Power. See page 12 for
instructions.
DO THIS...
THIS HAPPENS...
1.
Put food in the oven and
close the door.
continued on next page