Whirlpool MW87OOXS Microwave Oven User Manual


 
8. Touch START.
The PROBE TEMP and COOK POWER
Indicator Lights will stay on.
The Display will show “CCCL” to
show the food is less than 90°F.
As the food cooks, the Display will
show the internal temperature of
the food for every 5°F increase.
For 2 of every10 seconds, the Dis-
play will show the Cook Power you
selected, if you are using a Cook
Power other than high.
When the probe senses the tem-
perature you selected, the oven
shuts off. “End” will show on the
Display and 4 beeps will sound.
(You can stop the beeping by
opening the door or by touching
CANCEL.) “End” will remain on the
Display and a beep will sound every
30 seconds (to remind you that
food is left in the oven] until door
is opened or CANCEL is touched.
The Display will then show the time
of day.
NOTE: “Err” will be displayed after START is touched, if an incorrect
temperature has been selected (under 90°F or over 200°F).
Hints for using the temperature probe
DO...
DON’T...
l
use hot pads when removing probe from
food or food from oven.
l
stir foods during cooking when
recommended.
* stir soups, casseroles and drinks before
serving.
* cover roasts with foil and let stand a few
minutes after cooking. Remove foil if you de-
tide to cook it longer.
l
remove the probe from the oven when not
cooking by temperature.
l
let probe or probe cable touch any part of
the oven interior.
l
let probe touch foil (if used). Foil can be
kept away from probe with wooden tooth-
picks. Remove foil if arcing occurs.
l
use paper, plastic wrap or plastic con-
tainers. They will be in the oven too long.
* use probe in regular oven.
l
force probe into frozen food.
l
use probe for foods that need to simmer.
NOTE: Some foods are started using a timed (COOK) cycle and finished
by using a temperature (PROBE TEMP) cycle. You can set PROBE TEMP to
follow COOK, to avoid the need to reset the oven halfway through
cooking. PROBE TEMP can be programmed with the temperature probe
out. The oven will then pause between COOK and PROBE TEMP. “PROB”
will show on the Display to remind you to plug in the probe. Touch
START to continue cooking.
20