Filter
Top Products
Setting the clock
1. Push
the Clock pad. The colon flashes
and TIME will light up on the display.
0
CLOCK
2.
Use
the Hour and Minute pads to set the
time of day.
Push the
“up” (A) or “down”
(i) pad(s) until the correct time shows
on the display.
3. Push
the Start/Enter pad.
NOTE:
If you do not want the clock time
displayed, push and hold the Clock pad for
5 seconds. To display the clock time again,
push and hold the Clock pad for 5 seconds.
You should not have to reset the time.
Using the electronic Minute Timer
The Minute Timer does not start or stop the
oven. It works like a kitchen timer. It can be
set in hours and minutes up to 12 hours,
59 minutes. The Minute Timer will display
minutes and seconds for settings under
one hour. You will hear four l-second
tones when the set time is up.
1. Push
the Timer Set pad. TIMER will
come on and the display will show “:OO”
with the colon flashing.
2.
Use
the Hour and Minute pads to set the
desired time.
Push
the “up” (A) or
“down” (V) pad(s) until the correct time
shows on the display.
f-l
TIMER
SET
12