Filter
Top Products
5. Push
the Start/Enter pad. The set
temperature, HEAT, BAKE, TIMED, and
ON will light up on the display to show that
the~oven is heating.
NOTES:
l
You can change
the temperature or
time settings any time after pushing the
Start/Enter pad by repeating just Steps
2 through 4.
l
The display
will show “door” and a
tone will sound once every 5 seconds if
the door is latched when you try to
bake/roast.
6. The display
will count down the baking/
roasting time in hours and minutes (if cook
time is more than one hour) or in minutes
and seconds (if cook time is less than one
hour).
7. When the baking/roasting time is com-
pleted,
the oven will turn off automatically,
beep four times, and “End” will show on the
display. You will also hear four 1 -second
tones every minute until you push the Off/
Cancel pad.
NOTE:
To disable reminder tones, push
and hold the Cook Time pad for 5 seconds.
To reactivate tones, repeat this procedure.
To cancel the MEALTIMER” control
setting:
l
Push
the Off/Cancel pad to return the
display to the time of day.
To delay start and stop
automatically
Method l-Using Cook Time and
Delay Start Time:
1. Position
the oven rack(s) properly and
put
food
in the oven.
2. Push
the Bake pad to enter the Bake mode
(BAKE will light up).
Use
the Temp pad(s)
to set the desired temperature.
Push A
to
raise the temperature or V to lower the
temperature in 5°F increments. Use these
pads until the desired temperature shows
on the small display.
After you have set the desired tempera-
ture, the display will show the set tempera-
ture and the time of day.