Filter
Top Products
3. Push
the Start/Enter pad. The Minute
Timer will begin counting down immedi-
ately after the timer is started.
When time is up, “End” will show on the
large display and you will hear four
P-second
tones. You will also hear four
1 -second tones every minute until you
push one of the two Timer pads.
NOTE:
To disable the reminder tones,
push
and
hold the Timer Set pad for
5 seconds. To reactivate the tones,
follow the same procedure.
To cancel the Minute Timer:
l
Push
the Timer Off pad. The time of day
will show on the display.
Using the Off/Cancel pad
The Off/Cancel pad will cancel any function
except for the Clock and Timer Set functions.
When you push the Off/Cancel pad, the
display will show the time of day or, if Minute
Timer is also being used, the time remaining.
Audible signals
Audible signals tell you if a function is
entered correctly or not. They also tell you
when a cycle is completed.
To shut off all signals except for the
end-of-timer and error tones:
Push and hold
the Stop Time pad for
5 seconds. A short tone will sound to tell
you the signals have been changed.
Repeat the above step to turn the signals
back on.
To choose between high and low
volume signals:
Push and hold
the Delay Start Time pad
for 5 seconds. A short tone will sound to tell
you the signals have been changed. Either
“HI” or “LO” will appear on the time display
to show the volume you chose.
13