Set the Oven Selector on
BAKE.
Set the Oven Temperature
Control to the baking
temperature you want.
Put food in the oven.
Oven
rock. walls and door will be hot
During baking, the elements
will turn on and off to help
keep the oven temperature
at the setting. The Signal Light
will turn on and off with the
elements.
The top element helps heat
during baking, but does not
turn red.
ADJUSTING THE OVEN TEMPERATURE CONTROL
Let the oven preheat until the
Signal light goes off
When baking is done, turn
both knobs to OFF.
Does your new oven seem to be hotter or colder than your old oven at the
same settings? The temperature setting in your old oven may have changed
gradually over the years. The accurate setting of your new oven can seem differ-
ent. If you think the oven temperature needs adjusting, follow these steps:
Locking Screw
1.
Pull the Oven Tempera-
2. Loosen the locking
ture Control straight off.
screw; NOTICE position of
notches.
3. To lower the temperature, 4. To raise the temperature,
move black part of knob move black part of knob
closer to LO. Each notch
closer to HI. Each notch
equals about 10 F (5 C]. equals about IO’F (5 C).
Tighten the locking screw. Replace the knob.
25