Filter
Top Products
Cleaning and caring for your range
CONTROL PANEL AND KNOBS
1.
First make sure lower oven and surface
unit control knobs are set on OFF. All knobs
pull straight off. Surface unit knobs have
a collar and spring.
2. Use warm soapy water and a soft cloth to
wipe the panel. Rinse and wipe dry.
3. Wash knobs and surface unit collars in
warm soapy water. Rinse well and dry.
ollar
Put small end
of spring
closest to
control panel.
4. Push knobs straight back on. Make sure
they point to OFF. Make sure the collar and
spring on surface unit knobs are put to-
30 gether as shown.
SURFACE UNITS AND
REFLECTOR BOWLS
REMOVING
1.
Be sure surface units are OFF and COOL.
2. Lift the edge of the unit opposite the re-
ceptacle just enough to clearthe reflector
bowl.
3. Pull the surface unit straight away from the
receptacle.
4. Lift dut the reflector bowl and trim ring.