Filter
Top Products
Replacing
1. Make sure all sur ace units are off and cool
before replacing s Jrface units and reflector
bowls.
2. Line up openings in the reflector bowl with the
surface unit recefz tacle and the element hold-
down clip.
3. Hold the surface I rnit as level as possible with
the terminal just s at-ted into the receptacle.
Push the surface Jnit terminal into the
receptacle.
4. When terminal is 1 jushed into the receptacle
as far as it will go, push down the edge of the
surface unit oppo: ;ite the receptacle. The
element hold-dow 1 clip will keep the surface
unit from moving i rround.
NOTE: Reflector bov~ls reflect heat back to the
utensils on the surfac:e units. They also help
catch spills. When th ?y are kept clean, they
reflect heat better and look new longer.
If a reflector bowl (lets discolored, some of your
utensils may not be f at enough, or some may be
too large for the sum Ice unit. In either case,
some of the heat tha ‘s meant to go into or
around a utensil goe ; down and heats the
reflector bowl. This extra heat can discolor it.
22