Filter
Top Products
E
2-14
MODE
WARNING
mph
2
1
0
3
4
5
6
7
8
1000
r/min
GP7-036
q
GP7-035
A/SET
B
C
WARNING
GP7-037
EJU00657a
PADLOC (Programmable digital locking
ignition)
This feature is provided to deter unautho-
rized use. The function allows you to
chose either “START” or “LOCK” mode,
as the situation requires, much as you
would use a main switch key in a motor
vehicle.
If you have previously chosen “LOCK”
mode, the engine will not start unless the
right code is put in to select “START”
mode.
NOTE:
If you do not use the PADLOC system, it is
unnecessary to perform the initial setting
of PADLOC. If so the “START” mode is
automatically selected.
8 Initial setting
1) Disconnect the blue connector 1
behind the front storage compart-
ment.
2) After the warning lamp (LED) lights,
press the “MODE” button for at least
3 seconds until the display shows
“COdE”. You are ready to set your
code.
3) Select your 4-letter code by pressing
the “A/SET”, “B” or “C” buttons in a
desired sequence.
NOTE:
If you do not press a button for more than
10 seconds, the display automatically
turns off. This cancels the process of set-
ting of a code.