Filter
Top Products
GU0-105
E
4-16
GU0-102
q
GP7-104
EJU00553
GREASING POINTS
To keep moving parts sliding or rotating
smoothly, coat them with water resistant
grease (Yamaha Marine Grease,
YAMAHA grease A) or equivalent.
Throttle cable and choke cable
1) Grease the carburetor throttle cable
and choke cable inner wires.
2) Pull the throttle lever and remove the
seal. Spray a rust-inhibitor into the
outer cable. Refit the seal securely.
1 Seal
EJU00554
Oil pump cable
Grease the oil pump cable inner wire.
GP7-106
EJU00555
Steering cable ball joints and inner wire
1) Grease the steering cable ball joints
both on the handlebar side and on
the steering nozzle side.
2) Extend the steering cable inner wire,
and apply a thin coat of grease to it
both on the handlebar side and on
the steering nozzle side.