Filter
Top Products
E
2-15
WARNING
WARNING
GP7-041*
MODEMODE
A/SET
B
C
MODE
WARNING
GP7-039*
4) After completing code setting, the
buzzer will sound 3 times and the dis-
play will show “SET”. Lastly, the dis-
play turns off and the warning lamp
(LED) turns on again. After the meter
has displayed this sequence, recon-
nect the blue connector.
NOTE:
8 Your own code is kept even if the bat-
tery terminal is disconnected.
8 If you forget your own code, or if you
want to change the code, do this “Initial
setting” procedure again from the
beginning.
8 Selecting “START” or “LOCK” mode
Selecting the desired mode can only be
done after the “Initial setting” has been
done and while the display is not lighting.
1) Press the “MODE” button until the
meter displays the current mode,
“START” or “LOCK”.
2) With “START” or “LOCK” displayed,
press the “MODE” button continu-
ously for about 3 seconds until the
display changes to “COdE”.
3) Enter your 4-letter code by pressing
the “A/SET”, “B” or “C” buttons in
the right sequence.
NOTE:
If you do not press a button for more than
10 seconds, the display automatically
turns off. This cancels the process of
selecting the mode.
A/SET
B
C
WARNING
GP7-038
A/SET
B
C
WARNING
GP7-040