Filter
Top Products
E
4-13
EJU00547
STEERING CABLE INSPECTION
1) Check the smooth operation of the
handlebars and steering (jet) nozzle.
2) Turn the handlebars from lock to lock
and check that the distances between
rear end of the steering (jet) nozzle
and the nozzle at inside of the steer-
ing (jet) nozzle are even on both right
and left sides.
A=B
If steering is stiff or misadjusted, ask your
Yamaha dealer to service it.
A
A
GP7-096
B
B
GP7-097
q
w
A
GP7-098
EJU00550
THROTTLE CABLE INSPECTION AND
ADJUSTMENT
1) By pulling or releasing the throttle
lever, check that it moves back to the
set position smoothly. If not, ask your
Yamaha Water Vehicle dealer for ser-
vice.
2) Throttle lever free play should be
within specification. If it is not, adjust
it by loosening the lock nut and turn-
ing the adjuster so that throttle lever
free play is within specification with
the carburetor at idle position.
1 Lock nut
2 Adjuster
Throttle lever play:
A=4.0~7.0 mm (0.16~0.28 in)