Filter
Top Products
E
3-13
NOTE:
8 If initial setting of the PADLOC has not
been done, the “START” mode is auto-
matically selected.
8 If you have previously chosen “LOCK”
mode, the engine will not start unless
the right code is put in to select
“START” mode.
6) While lightly squeezing the throttle
lever, push the starter switch (green
button).
w
On this vehicle, the engine is connected
directly to the drive unit. Starting the
engine immediately generates some
thrust. Only enough throttle should be
applied to keep the engine at a fast
enough idle to stay running.
7) As soon as the engine starts to run,
release the starter button at once. The
starter button returns to its home
position automatically.
cC
8 Never push the starter switch while the
engine is running.
8 Do not keep the starter motor running
for more than five seconds. The battery
will be quickly discharged, and it will
be impossible to start the engine. The
starter motor may also be damaged. If
the engine does not start after five sec-
onds of cranking, release the starter
button. Wait at least 15 seconds before
trying to start the engine again.