Filter
Top Products
2-20
E
EJU00660a
Trip meter
A trip meter is provided for measuring the
approximate traveled distance in miles.
To show the trip meter, press the
“MODE” button until the display shows
“TRIP”. After showing “TRIP”, the display
turns to “MILE”.
1) When the display shows “MILE”,
press the “MODE” button for at least
2 seconds.
2) The buzzer will sound twice. The
warning lamp (LED) and “MILE”
blinks for 2 seconds, and “000” is dis-
played. Now the meter will start to
measure the distance you will travel.
3) When the trip meter begins measur-
ing the traveled distance, the “.” to
the left of “MILE” on the display will
blink. When the watercraft is
stopped, the “.” will no longer be dis-
played.
NOTE:
Measured distance may vary depending
on the water surface conditions, and wind
direction. The measured distance should
be used for a reference.
A/SET
B
C
MODE
WARNING
GP7-053
A/SET
B
C
MODE
WARNING
GP7-054
A/SET
B
C
WARNING
GP7-055
EJU00664a
Warning indicators
8 Fuel level
If the fuel remaining in the tank drops to
about 12 L (3.2 US gal, 2.6 Imp gal), the
fuel level segment, the fuel warning indi-
cator, “FUEL” and the warning indicator
lamp begin to blink. The buzzer also starts
sounding.