Filter
Top Products
NOTES
54
HOW TO FINISH UNPACKING
· Place appliance next to the space in which it will
be installed. See Fig 8.
· Remove the appliance packing except for bottom
tray which should be left in position until the
appliance is ready to be fitted into its cabinet.
· Ensure the owner is given these operating
instructions.
NOTE: It is imperative that the appliance is left in
the base to protect both the appliance and the
floor.
Important: Switch off at mains, miniature
circuit breaker and, if appropriate, remove
fuse before commencing any electrical
work.
INSTALLATION INSTRUCTIONS
Fig. 8