A SERVICE OF

logo

Open as PDF
next previous
Chapter 4
PC-IP Operation
33
Figure 4-6
Enter the new Channel ID – one to four alphanumeric digits.
Figure 4-7
Select the frequency from the pull down menu or enter the
desired frequency.
Figure 4-8
Add an offset to the channel’s frequency – plus or minus
3.000 MHz.
Figure 4-9
Select Yes to make a channel active in the plan or No to make it
inactive. Active channels are tested in the automated SMART
tests. Inactive channels may still be tuned manually by entering
the channel number. Deleted channels are not available for
either tuning method.
Note: Individual cells may be toggled either Yes to No by
double clicking on the cell to be changed. Hold
down Shift and double click on a group of selected
cells to toggle them either Yes or No.