April, 2007 SERVICE CALL CONDITIONS
4-75
4.3.4 ADDITIONAL SC CODES PRINTED IN SMC REPORTS
These codes are also used in the SMC report.
Codes that have the same number in this series are identified by an additional 4-
digit hexadecimal number.
SC No. Symptom Possible Cause
IEEE802 11b card startup error 853
D
Not used.
IEEE802 11b card access error 854
D
Not used.
IEEE802 11b card error 855
D
Not used.
IEEE802 11b card connection board error 856
D
Not used.
Address book data error 870
B
The address book in the hard disk is
accessed. → An error is detected in
the address book data; address book
data is not read; or data is not written
into the address book.
• Data corruption
• Defective hard disk
• Defective software
NOTE: To recover from the error, do any of the following countermeasures:
Format the address book by using SP5-832-008 (all data in the address book–
including the user codes and counters–is initialized)
Initialize the user data by using SP5-832-006 and -007 (the user codes and
counters are recovered when the main switch is turned ON).
Replace the hard disk (the user codes and counters are recovered when the main
switch is turned ON).
Printer error 920 D
The printer program cannot be
continued.
• Defective hardware
• Data corruption
• Defective software
Net file error 925 D
The management file for net files is
corrupted; net files are not normally
read.
Netfiles: Jobs to be printed from the
document server using a PC and the
DeskTopBinder software
• Defective hardware
• Data corruption
• Defective software
Other system SCs 992 C
The controller received an unknown
SC code from the engine.
• Contact your product specialist.
Network error 993 D
The ASIC program of GW controller
cannot be continued.
• Defective GW controller
