A SERVICE OF

logo

August, 2006 COPIER E-STUDIO4500C/5500C
1-15
Installation
Developer Cartridge Installation
Important
The OPC drum is exposed on the bottom of the PCU.
Do not put your hand under the PCU when you hold the PCU.
Always use the PCU stand. Do not put the PCU on other surfaces.
1. Push down the tab [A] above the Yellow PCU.
2. Hold the Yellow PCU [B] by its sides, and pull it out of the machine.
3. Set the PCU on the PCU stand [C]. (In the diagram, F is ‘front’, R is ‘rear’.)
4. Put a piece of clean paper on top of the PCU to protect the drum from light.
B132I903.WMF
F
R
B132R214.WMF
[A]
[B]
[C]