Filter
Top Products
Setting Use Notes
Aspect Ratio Adjusts the image output to
FillScreen, MatchInput or 16:9.
The default is FillScreen.
FillScreen produces an image that
fills the entire screen by stretching and
scaling the source video to match the
projector’s native resolution and aspect
ratio.
MatchInput displays the source video
in its native resolution and aspect ratio.
As a result, unused space could appear
along the top and bottom edges of the
screen (letterbox format) or along the
left and right edges of the screen
(pillarbox format).
16:9 displays the source video in 16:9
aspect ratio. As a result, unused space
appears along the top and bottom
edges of the screen. This is
recommended for use with HDTV and
DVD/Blu-ray discs enhanced for
wide-screen televisions.
See Video format compatibility on
page 29 for descriptions of each mode.
Startup Screen Selects the type of startup screen
(SMART, Capture User Startup
Screen or Preview Startup Screen).
This screen displays when the
projector lamp is starting and a video
source signal isn’t displayed.
SMART displays the default SMART
logo on a blue background.
Capture User Startup Screen closes
the on-screen display menu and
captures the entire projected image.
The captured image is displayed the
next time the on-screen display opens.
(The capture can take up to one
minute, depending on the complexity of
the background graphic.)
Preview Startup Screen enables you
to preview the default or captured
startup screen.
C HA PTER 3
Usingyour interactive whiteboardsystem
17