Filter
Top Products
Setting Use Notes
IP Address Displays the projector’s current IP
address in values between 0.0.0.0 and
255.255.255.255.
To change the projector’s IP address,
use the RS-232 connector (see
Network controls on page 75) or use a
DHCP server to assign a dynamic IP
address, and then set a static IP
address using the network remote
management feature (see Remotely
managing your system through a
network interface on page 59).
Subnet Mask Displays the projector’s subnet mask
number in values between 0.0.0.0 and
255.255.255.255.
Gateway Displays the projector’s default
network gateway in values between
0.0.0.0 and 255.255.255.255.
DNS Displays the projector’s primary
domain name number in values
between 0.0.0.0 and 255.255.255.255.
MAC Address Displays the projector’s MAC address
in xx-xx-xx-xx-xx-xx format.
Group Name Displays the projector’s workgroup
name as set by an administrator
(maximum 12 characters).
You can set the projector’s workgroup
name using the remote management
features (see Remotely managing your
system through a network interface on
page 59 and Remotely managing your
system through an RS-232 serial
interface on page 67).
Projector Name Displays the projector’s name as set
by an administrator (maximum 12
characters).
You can set the projector’s name using
the remote management features (see
Remotely managing your system
through a network interface on page 59
and Remotely managing your system
through an RS-232 serial interface on
page 67).
Location Displays the projector’s location as set
by an administrator (maximum 16
characters).
You can set the projector’s location
using the remote management features
(see Remotely managing your system
through a network interface on page 59
and Remotely managing your system
through an RS-232 serial interface on
page 67).
C HA PTER 3
Usingyour interactive whiteboardsystem
19